2019-2020 Dodge Ram 1500 4WD w/ Factory Air Ride Lift Kit by CST 6.5" Front 4" Rear Lift
If you're looking for a performance lift for your truck, but want it to still be able to be a daily driver, you've found the right kit. This CST Suspension lift kit lifts the front of your truck 6.5" with High Clearance Sub Frames, Fabricated Knuckles, Sway Bar Drops, Front Diff Drops, Differential Skid Plate, Billet Driveline Spacer, a track bar relocation bracket, and Steel Braided Brake lines. Complete front and rear bolt on air bar brackets are also included. With this kit you do not need to remove the factory air bags or struts from the truck.
This front lift is combined with 4" Rear Coil Spacers to lift the back by 4". This makes the truck sit level since the front sits lower from the factory.
Aftermarket Stainless Steel Brake Lines are included for the front to accommodate the new lift spindles. They will result in better braking performance. You also will maintain factory track width and towing capacity.
If you're worried about ride quality, don't be. Your truck will maintain its ride quality after being lifted with this kit. You'll also be able to fit up to an 18" or larger wheel with no more than 5" of back spacing. 35" tire can be ran with no trimming. 37" tire with minor trimming.
The part number for this item is CSK-D18-1 and it fits 2019-2020 Dodge Ram 1500 4WD models. This kit ONLY works on trucks with factory air ride.
Factory Track Width
Factory Tow Capacity
Factory Ride Quality
Keeps all Air Ride Controls
Compatible with Factory Stability Control
Fits 18" or Larger Wheel
Max Back Spacing 5"
35" Tire with No Trimming
37" Tire with Minor Trimming