About the EGT Module for Diablosport Trinity Tuners: When your exhaust starts to overheat, especially on diesel trucks, you can run into a lot of problems. This unit monitors your exhaust system temperatures so you don't have to wonder and worry. The DiabloSport Exhaust Gas Temperature Sensor (EGT) Module accurately measures exhaust gas temperatures of your vehicle. The DiabloSport EGT module is manufactured specifically plug right into the DiabloSport Trinity. Once connected and set up, the DiabloSport Trinity will be able to display your vehicle's EGT info right on the high resolution color touch screen in a digital gauge of your choice. Remember, you can customize your own gauge layout(s)/screen(s) so whether you want to focus on just EGT or have the EGT gauge be a part of an entire gauge layout, the Trinity and EGT module kit are perfect for you! Keeping your eye on the road is always number 1 which is why DiabloSport has introduced gauge alarms. Set a specific temperature and corresponding LED lights to flash when you EGT has reached the temperature of your choice. Some installation may be required. DiabloSport recommends using a certified mechanic to perform the manifold tap.
The part number for this item is T1010 and you must have a Diablosport Trinity tuner in order to use this unit.
Accurately measure your exhaust gas temperature
Compatable with any K-type Thermocouple (included with purchase)
Produce Size 2" x 2.875" x 1.125" (52mm x 75mm x 28mm) L x W x H
Accuracy ~5 Deg C (~9 Deg F)
Measurement Range 0-1023 Deg C (32-1873 Deg F)
Analog Outputs Linear 0-5V (Driving Current 20mA)
Operating Voltage 8V-18V
Power Consumption 0.3 Watts
Operating Temperature 0 - 85 Deg C
Sensor One K-Type Thermocouple
Enclosure Extruded Aluminum
Begin by finding a suitable mounting location for the EGT module. The
EGT module should be located inside the cab of your vehicle to avoid
exposure to weather. The EGT module should also be in a central
location since the connecting wires need to reach your vehicle’s ignition
power supply, header tube, and the Trinity itself.
Installing your EGT Thermocoupler:
1. For the most accurate results install the probe within 8-10” from your
vehicle’s turbo(s) on the downpipe. The probe should screw into a
1/8 NPT tap. DiabloSport reccomends using a certified mechanic to
perform this procedure.
Caution: Be careful when tightening the EGT probe. Avoid
“overtwisting” the wires as this can cause the insulation to become
loose and cause internal shortages.
2. Plug the connection end of the thermo coupler into the EGT module.
The negative pin should be on the left side. The cable is polarized
so it can only be connected one way.