- Save up to 40% on Gibson Exhausts!!
Click HERE to shop now!
Show Breadcrumbs

Access your Truck Bed Easily and Safely with an AMP Research Step

Have you noticed that pickup beds seem to be getting taller? If you want to get the most out of your pickup truck, you need quick and easy access to the bed. When youíre hauling construction materials, camping supplies, and other items, the last thing you want to do is waste time trying to climb into the bed. You can solve that problem with an AMP Research step. This simple step allows you to get into your pickup bed with incredible ease. No matter what youíre hauling, youíll be able to get into your truck bed with the help of an AMP Research Step. Installation is fast and simple, and you wonít have to drill anything.

Tips for installing an AMP Research Step
Before you begin installing your AMP Research step, you should take some safety precautions. For instance, itís never a bad idea to wear safety goggles whenever youíre working on your vehicle. After all, itís better to be safe than sorry. In order to install your AMP Research step, youíll also need a socket set and Allen wrench.

Just remove the bolts to the rear bumper. If you find it helpful, you may want to use a breaker baróthe bolts might be difficult to get to. Use the socket set to remove the bolts. Remember, you donít have to remove the bumper. You just have to remove the bolts on one side in order to install your AMP Research step.

Once youíve done that, you can install the upper mount onto the linkage using the prescribed hardware. Then torque it to your specifications. Tie the upper mount over the factor studs using the stock nuts. Now just install the step pad onto the linkage with the two screws provided with your AMP Research step. Adjust the foot pad and tighten the screws with your Allen wrench. Seem too easy to be true?

Life with your truck will be so much easier when you install an AMP Research step. You can trust New Level Motor Sports to have the AMP Research products youíre looking for.