Important notes: Some cutting is required on 4WD models. 20" or larger wheels w/ 5" or less of backspace are required! Rear shocks are required! You can purchase CST shocks above for an additional fee.
If you're looking for a performance lift for your truck, but want it to still be able to be a daily driver, you've found the right kit. This CST Suspension lift kit uses fabricated lift spindle uprights combined with front upper coilover extensions to achieve 7" of front lift. High clearance cross members with an integrated skidplate for the 4WD Solenoid actuator make this kit far superior to other lift kits. 4" rear blocks and new U-bolts, along with a carrier bearing spacer finish off the lift in the rear. The reason the rear is lifted less than the front is that from the factory this truck sits lower in the front, so by lifting the front more than the rear, you will level the truck out after completing the lift. Skid plates are also included on the to protect the differential. Differential drop hardware is also included to keep your CV angles in line. Sway bar links and bump stop mounts finish off the kit, making it a truly complete kit.
If you're worried about ride quality, don't be. Your truck will maintain its ride quality after being lifted with this kit. You'll also be able to fit 35” x 12.5” OR SIMILAR ON 8” WIDE WHEELS. You MUST use 20" or larger wheels with this kit with no more than 5" of backspacing!
The part number for this item is CSK-T10-1 and it fits 2007-2021 Toyota Tundra 4WD models.
Alternate part numbers: CSK-T3-3-1, CSK-T3-3, CSS-T3-3