- Tech Info
- Kit Components
If you're looking to add a bit of lift to your SuperDuty while maintaining ride quality, an ICON lift kit is a great solution for you. Whether you're looking to level out the truck, fit some larger tires and wheels on your truck, or both, this lift kit will get the job done.
This system is perfect for on-road and towing use, as well as mild off-road use like job site duty and washboard gravel roads. After installing this lift you'll enjoy approximately 25% increased front wheel travel over stock.
This lift kit achieves 2.5" of front lift with the use of dual rate coil springs. Alignment cams are also included. Icon 2.5 series fully rebuildable front piggyback shocks finish off the front and feature vehicle specific tuning for improved performance and ride quality.
The rear of the truck stays the same height so the truck is leveled out, and ICON 2.5 series fully rebuildable piggyback rear shocks are added and feature vehicle specific tuning for improved performance and ride quality.
The part number for this ICON lift kit is K62522 and it fits 2020-2022 Ford F-250 F-350 SuperDuty 4WD Models
OEM Wheels & Tires Fitment: Yes
Recommended Aftermarket Tires: 35" x 12.50" (Larger tires may fit but fender trimming and modifications will be required.)
Recommended Aftermarket Wheels: ICON Alloys | 17x8.5" w/ 5” Backspace / 6mm Offset
Recommended Aftermarket Wheels: ICON Alloys | 18x9" w/ 5.25” Backspace / 6mm Offset
Recommended Aftermarket Wheels: ICON Alloys | 20x9" w/ 5.25” Backspace / 6mm Offset
APPLICATION NOTE #6: SPRINGS ARE RATED FOR DIESEL ENGINES ONLY
APPLICATION NOTE #30: AN ADJUSTABLE TRACK BAR MAY BE NEEDED TO REALIGN THE AXLE FROM LEFT TO RIGHT, OR TO ADD ADDITIONAL STRENGTH
APPLICATION NOTE #115: LIFT HEIGHTS BASED ON 4WD CREW CAB DIESEL
APPLICATION NOTE #119: RARE CASES REQUIRE A 2.6 DEGREE ALIGNMENT CAM ON ONE SIDE OF VEHICLE FOR PROPER CASTER SPLIT
TECH NOTE: Tremor package reduces advertised lift heights by approximately 1.00"
TECH NOTE: Brake line kit (Part #61111) is optional for end users who do not want to bend the factory steel lines or are looking for a braided stainless upgrade (not necessary for complete install)
Ships in multiple boxes
Qty 1 62511 20-UP FSD FRONT 2.5” DUAL RATE SPRING KIT
Qty 1 67700P 05-UP FSD 4WD 0-2.5" FRONT 2.5 VS PB PAIR
Qty 1 37705P 99-UP FSD 0-3" REAR 2.5 VS PB PAIR