- Tech Info
- Kit Components
If you're looking to add a more aggressive lift to your SuperDuty while maintaining ride quality, an ICON lift kit is a great solution for you. Whether you're looking to level out the truck, fit some larger tires and wheels on your truck, or both, this lift kit will get the job done.
This system is perfect for on-road and towing use, as well as mild off-road use like job site duty and washboard gravel roads. After installing this lift you'll enjoy approximately 25% increased front wheel travel over stock.
The Stage 4 system sees the inclusion of the ICON Vehicle Dynamics Ford Super Duty 4-Link kit, which further improves performance by eliminating suspension bind commonly experienced with factory radius arms during articulation. This “freeing up” of the front end and the ability of the 4-Link Kit to maintain positive caster through the range of travel equates to an unparalleled ride quality in all conditions.
This lift kit achieves 4.5" of front lift with the use of dual rate coil springs. Alignment cams and radius arm drop brackets are included to correct geometry and caster for optimal alignment specs. Icon 2.5 series fully rebuildable front Piggyback shocks finish off the front and feature vehicle specific tuning for improved performance and ride quality.
A new track bar is also included to add additional strength and allow for better allignment of the axle.
The rear of the truck is lifted by replacing the factory lift blocks with new 5" lift blocks. New extended length U-bolts are also included. and ICON 2.5 series fully rebuildable piggyback rear shocks are added and feature vehicle specific tuning for improved performance and ride quality. The end result is a leveled stance with the newly lifted front end.
Take control of your ride: These Icon front and rear shocks feature Icon's CDCV technology. The ICON CDC Valve is an externally adjustable valve that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges. Control the stiffness of your ride with the simple turn of a dial, giving you the best of all worlds and the ability to optimize your ride when on the road or off-road
The part number for this ICON lift kit is K64524 and it fits 2020-2022 Ford F-250 F-350 SuperDuty 4WD Models
OEM Wheels & Tires Fitment: Yes
Recommended Aftermarket Wheels: ICON Alloys | 17x8.5" w/ 5” Backspace / 6mm Offset
Recommended Aftermarket Wheels: ICON Alloys | 18x9" w/ 5.25” Backspace / 6mm Offset
TECH NOTE: Tremor package reduces advertised lift heights by approximately 1.00"
TECH NOTE: Brake line kit (Part # 61110) is optional for end users who do not want to bend the factory steel lines or are looking for a braided stainless upgrade (not necessary for complete install)
Recommended Aftermarket Wheels: ICON Alloys | 20x9" w/ 5.25” Backspace / 6mm Offset
Recommended Aftermarket Tires: 37" x 12.50" (Larger tires may fit but fender trimming and modifications will be required.)
APPLICATION NOTE #6: SPRINGS ARE RATED FOR DIESEL ENGINES ONLY
APPLICATION NOTE #8: THIS SYSTEM MAY REQUIRE A CARRIER BEARING DROP BRACKET KIT (33700)
APPLICATION NOTE #21: NOT APPLICABLE ON VEHICLES EQUIPPED WITH A MANUAL TRANSMISSION
APPLICATION NOTE #31: ‘08 - CURRENT SUPERDUTY MODELS WITH GAS ENGINES MAY NEED EXHAUST MODIFIED TO CLEAR FRONT DRIVESHAFT
APPLICATION NOTE #115: LIFT HEIGHTS BASED ON 4WD CREW CAB DIESEL
Ships in multiple boxes
Qty 1 64050 08-UP FSD FRONT 4.5" BOX KIT
Qty 1 64011 20-UP FSD FRONT 4.5” DUAL RATE SPRING KIT
Qty 1 64038 17-UP FSD ADJ TRACK BAR KIT
Qty 1 164501 05-UP FSD FRONT UPPER LINKS
Qty 1 164502 05-UP FSD FRONT LOWER LINKS
Qty 1 164504 17-UP FSD 4 LINK FRAME BRACKET KIT
Qty 1 195275 99-UP FSD 5" BLOCK KIT
Qty 1 67003 11-UP FSD REAR 15" U-BOLT KIT
Qty 1 67710CP 05-UP FSD 4WD 4.5" FRONT 2.5 VS PB CDCV PAIR
Qty 1 37705CP 99-UP FSD 0-3" REAR 2.5 VS PB CDCV PAIR